网站首页 公司简介 新闻动态 诚聘英才 联系我们  
产品系列
科研级光谱测试系统
科学级成像相机
真空紫外光谱测试
表面分析测试系统
激光器和光源
FLIM 系统
时间控制系统
耗材材料
光束整形元件
特种镜头
光学平台及光机元件
光学生物传感器
光镊微操控系统
光学元件检测与装调设备
激光直写系统
系统方案设计与服务
教学演示仪器
栏目列表
新闻动态
公司产品
服务与支持
当前位置: 首页 > 公司产品 > 科学级成像相机 >

IRCameras 中波红外相机

作者: Kevin Peng    发布于: 2018-03-12 23:00    点击:
MID WAVE 900 SERIES


The IRC900 Series cameras provide high thermal sensitivity and spatial resolution in a compact package suitable for laboratory and field use.  Developed using closed cycle stirling coolers these cameras offer the highest full frame rates and shortest integration times in the industry. Produced with all metal external parts, these coolers are built for long life under stressing environmental conditions. IRC offers these products with the ability to configure spectral band cold filter, transfer tube configuration, and f/#, allowing you to alter for specific application requirements.  Utilizing the latest in all digital FPA Technology, the IRC900 Series offers unmatched sensitivity, ultra-low noise, no blooming and no cross talk.
IRC900 Series Camera Basics
There are 5 standard models of the IRC900. Click on the model numbers below for more detailed information about each model, or view the complete IRC900 Series specifications for a full comparison.
odel # IRC906 IRC906HS IRC910 IRC912
Detector
Detector type Indium Antimonide (InSb)
Spectral response < 1.0µm to 5.3µm  
Resolution (pixels) 640 x 512 640 x 512 1024 x 1024 1280 x 1024  
Pixel pitch 20µm 12µm 25µm 12µm  
Imaging Electronics  
Frame rate @ max window size  119 Hz 475 Hz 76 Hz 119 Hz  
Integration time < 150 ns to full frame  
Dynamic range 14-bits with 13-bit option to increase frame rate at small window sizes  
Windowing User defined in 4×1 increments; min width=320, min height=32  
Integration type Snapshot, automatic selection of integrate while read or integrate then read  
Ultra low latency sync Sync I/O, integration out  
Image data Simultaneous Camera Link & Gig-E  
Communications Serial over Camera Link & Gig-E  
Software control Cross platform GenICam compliant  
Performance  
NEdT 18mK < 30mK 18mK < 30mK  
Well capacity (electrons) 7M 2M 10M 2M  
Operability 99.8% 99.6% 99.6% 99.6%  
Optics  
Camera f/# f/2.3, f/3.0 & f/4.0 standard; custom cold shields available on request  
Cold filter 3.0µm – 5.0µm or no cold filter standard, optional CO2, SWIR or custom filters on request  
Lens mount Bayonet Bayonet Bolt hole pattern Bayonet  
Optional filter wheel Motorized four position warm filter wheel; 25.4mm diameter x 1.0mm thick filters  



MID WAVE 800 SERIES


The IRC800 Series cameras offer the ultimate in flexibility for research scientists. Camera operators can vary integration times, frame rates and cold filters to meet the most precise testing requirements making the IRC800 the perfect instrument for prototyping system development or where application requirements may change. A 1/3-liter LN2 pour-filled Dewar assembly maintains temperature for up to 20 hours unpowered and 9 hours powered which makes the IRC800 Series perfect for Scientific Imaging, Process Analysis and Quality Assurance. A developer’s kit is available for users who wish to create their own applications.
IRC800 Series Camera Basics
There are 4 standard models of the IRC800 based on the pour filled LN2 Dewar Assembly. All of the infrared cameras offer a digital Indium Antimonide (InSb) focal plane array (FPA) and your choice of 320×256, 640×512 or 1280×1024 format sensors. Click on the model numbers below for more detailed information about each infrared camera, or view the complete IRC800 Series specifications for a full comparison.
Model # IRC806 IRC806HS IRC812
Detector
Detector type Indium Antimonide (InSb)
Spectral response < 1.0µm to 5.3µm
Resolution (pixels) 640 x 512 640 x 512 1280 x 1024
Pixel pitch 20µm 12µm 12µm
Imaging Electronics
Frame rate @ max window size 119 Hz 475 Hz 119 Hz
Integration time < 150 ns to full frame
Dynamic range 14-bits with 13-bit option to increase frame rate at small window sizes
Windowing User defined in 4×1 increments; min width=320, min height=32
Integration type Snapshot, automatic selection of integrate while read or integrate then read
Ultra low latency sync Sync I/O, integration out
Image data Simultaneous Camera Link & Gig-E
Communications Serial over Camera Link & Gig-E
Software control Cross platform GenICam compliant
Performance
NEdT 18mK < 30mK < 30mK
Well capacity (electrons) 7M 2M 2M
Operability 99.8% 99.6% 99.6%
LN2 hold time > 8 hours typical, > 4 hours with optional cold filter wheel
Optics
Camera f/# f/2.3, f/3.0 & f/4.0 standard; custom cold shields available on request
Cold filter 3.0µm – 5.0µm or no cold filter standard, optional CO2, SWIR or custom filters on request
Lens mount Bayonet for 7, 13, 25, 50, 100 & 50/250 mm lenses; bolt hole pattern for non-standard lenses
Optional filter wheel Motorized four position cold filter wheel; 25.4mm diameter x 1.0mm thick filters
 


SHORT WAVE PRODUCTS


With a broad spectral response from 960 nm to 2600 nm, and the unmatched sensitivity of a cooled InSb sensor,  the IRC906-SWIR and IRC912-SWIR cameras are designed to address the most challenging applications for short wave infrared imagers. More versatile than traditional InGaAs cameras, the extended wavelength response of the IRC SWIR products makes it indispensable for spectroscopy, infrared search and track, target signature, astronomy, laser detection & characterization, and other demanding SWIR imaging requirements.
Based on high performance digital focal plane array technology, the IRC 900 series SWIR cameras offer both standard definition 640×512 and high definition 1280×1024 formats. These cameras operate at high frame rates with cooled InSb sensitivity, low noise and no pixel crosstalk or blooming. These cameras feature simultaneous 14-bit CameraLink and Gigabit Ethernet digital outputs, along with HDMI. GPS and IRIG-B inputs are available as options, as is a four position warm filter wheel.
Model # IRC906-SWIR IRC912-SWIR
Detector type Indium Antimonide (InSb)
Spectral response 900 – 2600nm 900 – 2600nm
Resolution (pixels) 640 x 512 1280 x 1024
Pixel pitch 20µm 12µm
Frame rate @ max window size 119 Hz 119 Hz
 


 
 
IRC712 SWIR INGAAS CAMERA


The IRC712 HD InGaAs SWIR camera provides the longest integration times and highest frame rate at 1.3 Mpixel resolution.
Manufactured by Princeton Infrarerd Technologies, this lattice matched InGaAs camera allows for high resolution SWIR imaging at 1280×1024 resolution at 95fps. The small pitch array, 12μm, combined with the high quantum efficiency of the lattice matched InGaAs arrays enables impressive imaging in the SWIR and visible band. The camera has the capability of three setpoints, 25C (no cooling), 0C (fan cooling) or -50C (water cooled) using a 3 stage TEC integrated in a vacuum package. This advanced digital array offers the lowest read noise (<30e-) of all cooled SWIR scientific cameras with no image lag. Low dark current InGaAs and a 3 stage TEC result in high sensitivity imaging enabling very long integration times in excess of 3 minutes.
The camera has a medium Camera Link interface to allow for fast full frame rate imaging with a dynamic range of 14 bits. Lattice matched InGaAs provides high quantum efficiency response in the shortwave infrared as well as in the visible with response from 0.4um to 1.7um.  Software for camera control and image acquisition is available and supports a number of Camera Link framegrabbers.
CAMERA CAPABILITIES
  • 1280 x 1024 resolution
  • 400 – 1700nm spectral response
  • 12μm pixel size
  • <30 electrons read noise
  • 3 stage TE cooler
  • Frame rate >95Hz
 
IRC906SLS

Closed Cycle Broadband Infrared Camera
The IRC906SLS incorporates the innovative Strained Layer Superlattice (SLS) Sensor allowing it to detect infrared radiation in both the mid-wave (MWIR) and long-wave (LWIR) spectral regions.  This 640×512 format, 20 micron camera operates at 475 frames per second at full window size with no electronic crosstalk.   The IRC906SLS utilizes on-board frame averaging to improve signal to noise, allowing greater sensitivity and superior image quality.  An optional embedded filter wheel allows the user to select specific wavelengths of interest in both the MWIR and LWIR regions, taking full advantage of the broadband response of the SLS sensor.


Detector  
Detector type Strained Layer Superlattice
Spectral response <2.0μm – 11.25μm +/- .75μm
Resolution (pixels) 640 x512
Pixel pitch 20 micron
Imaging Electronics  
Frame rate @ max window size 478 Hz
Integration time <500 ns to full frame time
Dynamic range 14-bit Full Camera Link; HDMI; Giagbit Eithernet
Windowing User defined in 4×1 increments; min width=320, min height=32
Integration type Snapshot, automatic selection of integrate while read or integrate then read
Ultra low latency sync Sync I/O, integration out
Image data Simultaneous Camera Link & Gig-E, HDMI
Communications Serial over Camera Link & Gig-E
Software control Cross platform GenICam compliant
Performance  
NEdT <35mK @ 30°C
Well capacity (electrons) 7M
Operability >98%
Optics  
Camera f/# f/2.3 coldshield standard, custom configurations available
Cold filter No cold filter standard; 3.0µm – 5.0µm, CO2, LWIR or custom filters on request
Lens mount Bayonet
Optional filter wheel Motorized four position warm filter wheel; 25.4mm diameter x 1.0mm thick filters
 
|关于我们|联系方式|客户留言|服务与支持|相关知识|友情链接|
Copyright © 2013-2014 FredorScience. 弗锐达科技 版权所有 沪ICP备13044418号-1